576 Hydraulic Ironing and Embossing Press
  Type :  850 ~ 1800 Tons Datasheet

................................................................................................................................................................................
@The frame structure

@The structure of the machine has been studied which make the most of the space without leaving any outside the frame. It has been designed to give a clear working area with minimum space require, the material for making the frame structure is a very good quality steel the exclusive frame construction for un matched strength and stability.

@The hydraulic pressure.

@The pressure is adjustable by pressure control system hydraulic pressure is provided by a single, large diameter piston that insures precise evenly distributed pressure on the table the cylinder housing is made from high grade casting steel for added strength.

@Hydraulic ironing and embossing press are delivered complete with all parts accessories required for installation and operation.

@The press is easy to maintain and economical to operate.

@Adjustable pressure control system simplified and speeds production.

@Thermometer controlled heating chamber insures consistent operating temperatures. Double pressure system, give deeper, clear imprint.

The electrical control panel

A group conveniently located control panel enables the operator to easily change, stop or reset the operating cycle as needed. So that each can be controlled, the safety device of protection against accidents ensures trouble free operation time. Temperatures, pressures and all adjustable by means of precision electrical instruments is making possible, a wide choice of processing cycles.

It is available to change Many pressure working To normal working

@Three pressure it press 3 stokes in one time working. It means that in each one time printing. There are two stokes automatic repeat in order make more clear embossing design on finished leather.

@For example in the working operation, if you require this machine to press with the pressure setting at 200 kg/cm2 . It grain more clear and nice especially large embossing design.
................................................................................................................................................................................
 

specification

Type
850 TONS 1200 TONS
Size of plate
1000 mm x 1370 mm 1000 mm x 1370 mm
Total pressure on piston
850 Tons 1200 Tons
Space between plate
120 mm 140 mm
Pump power
30 kw 40 kw
Heating plate
18 kw 18 kw
Pressure on working plate
62.04 kg/cm 2 87.6 kg/cm 2
Complete working
15 cycle/ min 15 cycle/ min
Net weight
18,500 KGS 24,500 KGS

specification

Type
1500 TONS 1800 TONS
Size of plate
1500 mm x 1370 mm 1500 mm x 1370 mm
Total pressure on piston
1500 Tons 1800 Tons
Space between plate
140 mm 140 mm
Pump power
48 kw 56.25 kw
Heating plate
27 kw 27 kw
Pressure on working plate
73 kg/cm 2 87.6 kg/cm 2
Complete working
15 cycle/ min 15 cycle/ min
Net weight
32,000 KGS 43,000 KGS
     
  736 Hydraulic Setting Out and Sammying Machin  
     
  096 Heavy Duty Hydraulic Fleshing Machine  
     
  576 Hydraulic Ironing and Embossing Pres  
     
  656 Hydraulic Shaving Machine  
     
  816 Hydraulic Through feed sammying machine  
     
  645 Heavy Duty Hydraulic Shaving Machine  
     
  175 Reciprocating Sammying Machine  
     
  566 Combined Brushing and Air Dedusting Machine  
     
  3H Drums  
     
  Pneumatic Buffing machine  
     
  Felts (for Wet and Finishing using)  
     
  Professional Making Plant Design for Tannery